Low cost, no cost, easy entry digital woodworking…

It always starts with a design

Digital woodworking is using digitally controlled tools in your workshop as an addition to hybrid and handtools. Most often that means owning and operating a CNC and learning to use CAD programs. For many, committing to a CNC is also a big step financially.

Here’s the thing, you can mine a nice chunk of the benefits of digital tools at little or no cost; with no long-term commitment and with very little fear of technology on your part by using a technique I used for many years.

It doesn’t matter how you approach woodworking; power tools, hybrid or hand tools, you can immediately benefit with this approach. This is a good trick any woodworker can use. I’ll show you how in this three-part series.

Start With Paper Patterns

The trick: If you have a computer, and if you’re reading this blog, likely you’ve got one then you can make a computer-generated drawing. Armed with a drawing, you can make patterns. With accurate patterns, you can make accurate parts. Wherever the direction of your woodworking path is taking you, I’m sure we all can agree that accurate parts are important. Patterns are the trick.

From the time I started woodworking as a hobby in the mid-1990’s, I created all my designs for my projects on a computer using graphic design drawing software. In the beginning, I used the same vector-based drawing tools I was already familiar with as a graphic designer. Most of the time it was Freehand and Adobe Illustrator. Both are similar, with Freehand, a long gone, favorite program that was a bit better at precision CAD control. I loved that program. Using either one, I would draw my furniture parts, full size. Once you have a full-size drawing, you can make a pattern.

If you already have Adobe Illustrator, it’s a good place to start. Worked very well for me. But, for a lot of people, the software cost of Adobe software is prohibitive and the time to learn is limiting — after all, it is a professional drawing tool. There are alternative drawing programs that are simpler to learn, cheaper and sometimes, free. But, no matter your choice, it does need to be a certain kind of software. Drawing software.

Use Vector Drawing or CAD Software

Some background. When I say drawing programs, I’m referring to vector-based drawing programs. Vector drawing programs are different than painting programs. When you draw something in a drawing program, it is not composed of individual pixels, but paths. Vector graphics are based on vectors which lead through locations called control points or nodes. Each of these points has a definite position on the X and Y axes. These points determine the path, that say, a curved line goes through. If you’ve ever used a plastic French curve and maneuvered it around tangent points to smooth out a curve, the idea is the same.

Rest assured that you don’t have to understand the details on what’s going underneath the surface, as all the detail is stored internally in the drawing file. You just draw the shapes or curves or lines you need. What makes drawing with vector based tools special is that no matter how the components of the drawing are scaled, the precision is held all the way through. If a drawing is enlarged or shrunk, it’s all executed, printed or machined on a CNC or other digitally based machines like a laser cutter, the results are perfect. Whether it’s a detail on a cufflink, a sign the size of a semi-truck, or a furniture part cut on a CNC, it doesn’t matter. Perfection is there. It’s not just vector-based drawing software that does this, CAD software works the same way.

Note that you cannot create patterns using painting or raster based programs like Adobe Photoshop or Microsoft Paint or the painting mode in Corel Draw. This kind of software creates pixels that are subject to scale. You can see this as you zoom all the way in, your drawing gets more and more “jaggy” as the pixels get bigger. Not so with vector based line drawing or CAD software. Some kind of vector-based drawing software is what you need to make paper or CNC cut patterns.

Examples of graphic design drawing software

• CAD software is always the first choice.
• Adobe Illustrator ” Part of the Adobe’s Creative Cloud. It’s a professional tool, so learning is required and expensive. PCs and Macs.
• Inkscape ” An open source (free) drawing program similar to Illustrator. Runs on PCs and Macs
• Autodesk Graphic ” Low cost but pretty powerful for Macs and PCs
• Corel Draw ” Moderate cost for Mac or PC

Start with CAD if you Can

In the world of digital woodworking, a vector-based graphics drawing program should be considered a temporary stop. It’ll get you started, it will work, as I proved for many years, but in the long run, you’re far better off using CAD software. All CAD software is vector based and therefore precise. The fact that it’s designed from the start for precision drawing tasks and has lots of extra tools to make working with it easier for woodworkers make it the better starting point. There are free CAD programs, low-cost programs, middle priced and expensive programs. Down the road, I’ll get into more details on what to look for and review different software but for a place to start making patterns, any CAD program will work.

Making Paper Patterns

Step one is to draw the pattern you want to make, full size. By that I mean if you’re drawing an arm of a chair that will be 35″ long, make sure you drawing of it is 35″ long. Use the tools in your drawing software that provide the information on the size and dimensions of a drawing to help you. Also, makes sure you are accurate in every way. Lines intended to be straight must be drawn straight. Critical dimensions are exact. This is where CAD software excels. You can do it with graphic design drawing software as I have done, but it’s trickier.

My first patterns were output onto paper via standard home/office printers. When larger than standard paper sizes were needed, I printed segments of a design using the automatic “tiling” printing feature that divides a large drawing into pieces that overlap that can be printed on smaller pages. To make it easier to splice them together, I would add targets or a grid to align segments and splice and tape the different pieces together until I had a full-size drawing of a part. Another method is to go to your local office supply or print service stores that offer larger scale output.

Next, I spray glue the paper pattern onto a piece of plywood or MDF, bandsaw to the line, smooth and blend with rasps until the everything is just right, then peel the paper off. This all worked quite well for me, but it became time-consuming as I needed more patterns and more complicated as I needed larger patterns. So, it was time to find a better way. It was time to skip the paper and go from directly from drawing straight to pattern making. More about that in Part Two

The post Pattern Making Basics appeared first on woodworking.digital.

My CAD software of choice is Rhino3D. My favorite CAM software is RhinoCAM. Now, the names might be close but the company offering CAM software is different than the CAD software company. It’s MecSoft, where Rhino3D comes from McNeel.

Now that we got that confusion out of the way, let me explain a few details. If you’re already using Rhino3D, the best way to go with CAM software is to get RhinoCAM because it’s just a plugin for Rhino. Makes setting up machine routines a piece of cake because you do it inside your CAD program. But, if you’re not a Rhino3D user, that’s okay, too. Mecsoft makes a freestanding verison called VisualCAM. Which means you can use whatever CAD program you’re already using and export the file to open up in VisualCAM. Once there, you setup your machine operations just like I do. Works great. So, if you’re using another CAD program (Fusion360, other Autodesk products, TurboCAD, whatever) this is the soluton for you.

The reason I bring all this up, is Mecsoft is having a great sale on their entry level CAM software package called Xpress. Rather that $595, they’re selling it for $299 until December 16th. That’s a great deal. And, it’s a perpetual license so you don’t have to annually subscribe, unless you want upgrades. You can get this in the freestanding version, the Rhino version and a verison that plugs into SolidWorks.

Mecsoft’s Sale

Mecsoft makes CAM packages for machining all kinds of fancy things up to $10k in price, but I can tell you that for Digital Woodworkers the Xpress package gets you where you need to go for $299. You get the 2.5D routines you really need the basics routines for 3D carving. I’ve done a lot of 3D carving and most of the time I use just the basic routines included with the $299 Express package. And, should you get ambitious and want a fancier version, you just pay the difference.

Bonus: The Xpress package includes Mecsoft’s very good Nesting program.

So, who is VisualCAM or RhinoCAM Xpress for? Well, unless you’re already using fancy 3D CAM routines available in say, Aspire, you might want to have a look at VisualCAM. Particularly if you’re using Fusion360, VCarve, TurboCAD, Autodesk products or using the very limited software available for the Shapeoko this is a major CAM improvement . It’s great CAM software with more than excellent support.

Great sale. Go for it. Mecsoft’s Sale.

PS. Tell them I sent you. I’m not a shill. just a fan of their great software.

The post CAM Software Sale appeared first on woodworking.digital.

I’ve posted the video recording of the workshop on my YouTube channel. Here’s the link if you missed it.. https://youtu.be/kAAFHM8Rhmw

Topic: Design Skills for Woodworkers

The post August 16th Workshop Follow Up: Design Skills for Woodworkers appeared first on woodworking.digital.

Why does design matter for woodworkers? Because the difference between good woodworkers and great woodworkers is not about training, craft or physical skills, it’s about exceptional design applied with excellent craftsmanship

Topic: Design Skills for Woodworkers

Time: Aug 16, 2020 01:00 PM Pacific Time (US and Canada)

Join Zoom Meeting

https://us02web.zoom.us/j/84688934632?pwd=b3pSL0FidXJjN1NBSEZDUGVGa0NxUT09

Meeting ID: 846 8893 4632

Passcode: 467123

The post August 16th Sunday Workshop: Design Skills for Woodworkers appeared first on woodworking.digital.

The post June 21 Live Workshop Follow Up appeared first on woodworking.digital.

On June 21st, I’ll follow up and take the previous week’s 2.5D design and make it into a 3D CNC carved design using a couple of simple 3D CAD techniques. And, how to machine it, of course. Plus… Well, let’s just say that I’ll give you something to consider regarding future furniture design using the power of digital woodworking tools.

If a question that comes up during the workshop, just use the chat function in Zoom and I’ll do my best to answer it live. I may have a few questions of my own, too and will send out polls during the event. 

See you at the next TWO Sunday Workshops. Part one is 2D design and machining. Part two is 3D design and machining.

To join the workshop, at the time of the meeting click the links below.

June 14th Sunday Workshop PART ONE

Join Zoom Meeting

https://us02web.zoom.us/j/84819051001?pwd=c0oxcHhMVHcxSDlCbzNmMmNkQVRiQT09

Meeting ID: 8848 1905 1001   Password: 239927

June 21st Sunday Workshop PART TWO

Join Zoom Meeting

https://us02web.zoom.us/j/83477019799?pwd=aG5UVTZVU2ZPa01QK3cvRzkwbS9adz09

Meeting ID: 834 7701 9799   Password: 299007

The post June 14th and 21st Live Sunday Workshops appeared first on woodworking.digital.

The post 2020 Digital Woodworking Workshops appeared first on woodworking.digital.

The post Workshop Added: 2019 Digital Woodworking Workshop, June 8-9 appeared first on woodworking.digital.