CNC files Archives - woodworking.digital

Maker Workstation 24″ x 72″ Full Set DXF Files

Tim — Fri, 02 Jul 2021 21:23:23 +0000

The complete set! Files to create a Maker Workstation with a CNC. These are DXF files used for CNC machining a 72″ x 24″ Workstation Top, System Base, Accessories, and Furniture. Includes all three top layers and files to make Side Plate Holders, Side Plates, system base, and accessories. Other parts needed are in the Popular Woodworking feature article. Though the workstation is 72″ long, it has been designed to be machined on CNCs with at least 24″ working width using step-through techniques or with a Shaper Origin hand-held CNC.

Individual files are also available for the Maker Workstation 72″x24″ top, Workstation system base, and workstation accessories. This is a specially priced bundle for all three files.

Note that exported DXF files sometimes “unjoin” 2D object curves. Make sure you check and rejoin objects as necessary.

CNC programming information. All files assume Z touch off is on top. Adjust if you prefer to Z off the bottom. Because these are layered files, additional CAM programming information outside of cutting all the way through the material is in the layer title. For example, The T-Nut countersunk layer indicates to cut .0625 deep or depth of the side plate mount pockets. Use a .250″ CNC mill or up-cut router bit, measure the bit you’ll use, program for it, and run tests of dog holes and plate mount pocket fit tests before you begin.

All files and plans are as is and come without instructions, CNC programming, or project support.

Please check out and include your name and email address. You’ll be subscribed to the woodworking.digital email list. Don’t worry you can unsubscribe at any time. And we won’t sell your information. You’ll get a link to the download upon checkout and in your email.

Because these are CNC-ready files make sure you understand the usage rules below. By downloading the files you agree to the Non-Commerical license below.

If you think you’re up to producing Maker Workstations commercially, we are looking for a few enthusiastic and capable European partners to produce complete workstations and workstation kits for our clients and your own clients. You must be able to handle customer fulfillment and support in your own country. To qualify you must have proven commercial CNC fabrication experience, a CNC at least 48″ x 96″ in size, the ability to execute projects at a high level of precision with impeccable quality, and a desire to make all customers happy. If that’s you, contact tim@woodworking.digital

Three rules

Do not share, please point friends to Woodworking.Digital website to access my plans, templates, and other content.
By downloading you agree to follow these key rules: All designs, plans, and files are subject to the CC Attribution-NonCommercial 4.0 license. This means give credit for the original design and derivatives wherever it’s shown and confirm that you cannot sell creations based on the design nor the sell design files themselves.
All other content is Copyright Tim Celeski. All rights reserved.

The post Maker Workstation 24″ x 72″ Full Set DXF Files appeared first on woodworking.digital.

Maker Workstation ACCESSORIES DXF Files

Tim — Fri, 02 Jul 2021 18:46:46 +0000

Files to create a Maker Workstation with a CNC. These are DXF files used for CNC machining Workstation Accessories. These accessories work for all workstation sizes, top plates, and Worx Stacks. Includes files to make Workstation Furniture sets, the Vice Module, and other accessories. Other parts needed are in the Popular Woodworking feature article.

Files are available for Maker Workstation 72″x24″ top, system base, and workstation accessories. This file is for the Maker Workstation Accessories. A specially priced bundle is available for all three files.

Note that exported DXF files sometimes “unjoin” 2D objects. Make sure you check and rejoin objects as necessary.

CNC programming information. All files assume Z touch off is on top. Adjust if you prefer to Z off the bottom. Because these are layered DXF files, additional CAM programming information outside of cutting all the way through the material is in the layer title. For example, The T-Nut countersunk layer indicates cutting .0625 deep and leg pockets. Use a .250″ CNC mill or up-cut router bit, measure the bit you’ll use, program for it, and run tests of dog holes and plate mount pocket fit tests before you begin.

All files and plans are as is and come without instructions, CNC programming, or project support.

Because these are CNC-ready files make sure you understand the usage rules below. By downloading the files you agree to the Non-Commerical license below.

Three rules

Do not share, please point friends to Woodworking.Digital website to access my plans, templates, and other content.
By downloading you agree to follow these key rules: All designs, plans, and files are subject to the CC Attribution-NonCommercial 4.0 license. This means give credit for the original design and derivatives wherever it’s shown and confirm that you cannot sell creations based on the design nor the sell design files themselves.
All other content is Copyright Tim Celeski. All rights reserved.

The post Maker Workstation ACCESSORIES DXF Files appeared first on woodworking.digital.

Maker Workstation 24″ x 72″ BASE DXF Files

Tim — Fri, 02 Jul 2021 18:37:12 +0000

Files to create a Maker Workstation with a CNC. These are DXF files used for CNC machining a 72″ x 24″ Workstation System Base. Includes all system base files to make Legs, Stretcher Panels, and Leg Dog Hole Strips. Other parts needed are in the Popular Woodworking feature article.

Files are available for Maker Workstation 72″x24″ top, system base, and workstation accessories. This file is for the Maker Workstation Base. A specially priced bundle is available for all three files.

Note that exported DXF files sometimes “unjoin” 2D objects. Make sure you check and rejoin objects as necessary.

CNC programming information. All files assume Z touch off is on top. Adjust if you prefer to Z off the bottom. Because these are layered files, additional CAM programming information outside of cutting all the way through the material is in the layer title. For example, The T-Nut countersunk layer indicates cutting .0625 deep and leg pockets. Use a .250″ CNC mill or up-cut router bit, measure the bit you’ll use, program for it, and run tests of dog holes and plate mount pocket fit tests before you begin.

All files and plans are as is and come without instructions, CNC programming, or project support.

Because these are CNC-ready files make sure you understand the usage rules below. By downloading the files you agree to the Non-Commerical license below.

Three rules

Do not share, please point friends to Woodworking.Digital website to access my plans, templates, and other content.
By downloading you agree to follow these key rules: All designs, plans, and files are subject to the CC Attribution-NonCommercial 4.0 license. This means give credit for the original design and derivatives wherever it’s shown and confirm that you cannot sell creations based on the design nor the sell design files themselves.

The post Maker Workstation 24″ x 72″ BASE DXF Files appeared first on woodworking.digital.

Maker Workstation 24″ x 72″ TOP DXF Files

Tim — Fri, 02 Jul 2021 17:38:36 +0000

Files to create a Maker Workstation with a CNC. These are DXF files used for CNC machining a 72″ x 24″ Workstation Top. Includes all three top layers and files to make Side Plate Holders and Side Plates. Other parts needed are in the Popular Woodworking feature article. Though the workstation is 72″ long, it has been designed to be machined on CNCs with at least 24″ working width using step-through techniques or with a Shaper Origin hand-held CNC.

Files are available for Maker Workstation 72″x24″ top, system base, and workstation accessories. This file is for the Maker Workstation Top. A specially priced bundle is available for all three files.

Note that exported DXF files sometimes “unjoin” 2D object curves. Make sure you check and rejoin objects as necessary.

All files and plans are as is and come without instructions, CNC programming, or project support.

Because these are CNC-ready files make sure you understand the usage rules below. By downloading the files you agree to the Non-Commerical license below.

Three rules

Do not share, please point friends to Woodworking.Digital website to access my plans, templates, and other content.
By downloading you agree to follow these key rules: All designs, plans, and files are subject to the CC Attribution-NonCommercial 4.0 license. This means give credit for the original design and derivatives wherever it’s shown and confirm that you cannot sell creations based on the design nor the sell design files themselves.

The post Maker Workstation 24″ x 72″ TOP DXF Files appeared first on woodworking.digital.