This file is in DXF format. Notes for what needs to be done are in the file.

A 1/4″  bit is needed to CNC the spoil board. Precision is important when machining these templates. Dog hole size is critical. Make sure you measure your bits before machining. Most .250″ bits are actually .242″-.245″. Adjust accordingly when programming a CNC.

See the print issue or popularwoodworking.com for more project information and step-by-step articles to help you build the project.

My request back at you: If you build a Maker Workstation, I’d like to see it. I’d appreciate it if you send a photo and if you post it on social media, tag @woodworking.digital on Instagram and use the hashtag #makerworkstation.

All files and plans are as is and come without instructions, CNC programming or project support.  

Yes, this is FREE!

Please check out and include your name and email address, no payment information is required. You’ll be subscribed to the woodworking.digital email list. Don’t worry you can unsubscribe at any time. And we won’t sell your information. You’ll get a link to the download upon checkout and in your email.

Three rules

1. Do not share files, please point friends to Woodworking.Digital website to access my plans, templates, and other content.
2. By downloading you agree to follow these key rules: All designs, plans, and files are subject to the CC Attribution-NonCommercial 4.0 license. This means give credit for the original design and derivatives wherever it’s shown and confirm that you understand that you cannot sell creations based on the design nor the sell design files themselves.
3. All other content is Copyright Tim Celeski. All rights reserved.

The post Shapeoko XL Pass-Through Spoil Board Files appeared first on woodworking.digital.