On Sunday, November 15th, I held an online workshop on YouTube. Rather than a Zoom chat, this was done as a live streaming YouTube event. The replay is now available on my YouTube Channel: YouTube.com/digitalwoodworking. The topic was a Q&A and I showed a new all-in-one custom CNC spoilboard bed dedicated to positioning, registering and […]
November 15th Workshop Replay Read More »
During the October 4th, 2020 Sunday Workshop, a couple of folks requested links to the 3D printable models used to make various clamps and other components for the new workbench including the new Rockler porable drill guide I demonstrated. The links are below. Unlike earlier workshops, the October 4th recording won’t be posted on YouTube.
October 4th, 2020 Sunday Workshop Follow Up Read More »
Yup. I pushed forward the scheduled September 20th workshop two weeks. The next workshop will be October 4th at 1:00pm PDT. The reason for the delay? Very busy with several projects. One in particular will be of interest to woodworking.digital followers. I’ve designed a new kind of workbench with a focus on woodworkers more likely
Sunday Workshop: October 4th, 2020 Read More »
At the August 16th Live Sunday Workshop I gave a presentation dedicated to ways for woodworkers to learn to become better designers. I’ve posted the video recording of the workshop on my YouTube channel. Here’s the link if you missed it.. https://youtu.be/kAAFHM8Rhmw Topic: Design Skills for Woodworkers
August 16th Workshop Follow Up: Design Skills for Woodworkers Read More »
At this August Live Sunday Workshop I’ll give a presentation dedicated to ways for woodworkers to learn to become better designers. Why does design matter for woodworkers? Because the difference between good woodworkers and great woodworkers is not about training, craft or physical skills, it’s about exceptional design applied with excellent craftsmanship Topic: Design Skills
August 16th Sunday Workshop: Design Skills for Woodworkers Read More »
On Sunday July 19th, I held a Live Sunday Workshop via Zoom. The topic was about the parametric plywood bench that was featured in the December 2019 issue of Popular Woodworking magazine. I showed how to vary the design and several methods to construct it. Speaking of which, above is a link to the recording
July 19th Live Workshop Follow up Read More »
In the December 2019 Issue of Popular Woodworking Magazine I wrote an aricle on Parametric Bench Design. In the next workshop, I’ll show you how I designed and made it using a CNC. A very different furniture construction technique. Lots of new things to learn. The plans for the bench are available on this site
July 19th Workshop. Parametric Furniture Design and Construction Read More »
On Sunday June 21st, I held a Live Sunday Workshop via Zoom. The topic was about how to design a modern hall table in CAD and setup your CNC to machine it. I showed how to convert the 2D furniture from the previous workshop into 3D carved furniture. Lots to see! Speaking of which, here’s
June 21 Live Workshop Follow Up Read More »
