The BARN Workbench is a based on a modern Roubo design. Built on a budget, it features a simple base made out of 4″ x 4″ material and a pre-made Maple top. The BARN Workbench is named for a community group of woodworkers and other artisans. BARN is the Bainbridge Artisan Resource Network located on […]
BARN Workbench Part Two Read More »
On Sunday July 19th, I held a Live Sunday Workshop via Zoom. The topic was about the parametric plywood bench that was featured in the December 2019 issue of Popular Woodworking magazine. I showed how to vary the design and several methods to construct it. Speaking of which, above is a link to the recording
July 19th Live Workshop Follow up Read More »
Okay it’s time to get serious. Two, back-back Sunday Workshops and Furnture Design and CNC Machining. On the June 14th workshop, I”ll show you how to take a very basic design and turn it into a modern hall table. Then I’ll show you how I setup the machine operations and how to make it on
June 14th and 21st Live Sunday Workshops Read More »
Digital Woodworking Q and A Okay it’s time. Previous workshops have been filled up, I rarely leave time fAfter 4 Live Sunday Workshops, it’s time for an open Q and A. I’ve been doing a lot of talking that last forr workshops, leaving little time at the end for questions. Now, it’s your turn. On the
May 31st Live Sunday Workshop Read More »
In the December issue of Popular Woodworking published my article on the Modern Parametric Bench. Good news! PW has now made the article available online. Armed with the PDF plans or CNC ready files, you can make your own bench. See the article here, for FREE…
Modern Bench Article Read More »
Second workshop added. On June 8-9th, I’ll hold an exclusive two-day class for 2-4 students in my shop. We’ll cover basics, beyond the basics and advanced techniques in Digital Woodworking. Here’s the Class Syllabus and Schedule. Contact Tim for more information.
Workshop Added: 2019 Digital Woodworking Workshop, June 8-9 Read More »
On April 27-28th, I’ll hold an exclusive two-day class for 2-4 students in my shop. We’ll cover basics, beyond the basics and advanced techniques in Digital Woodworking. The syllabus and schedule will be coming soon. Contact Tim for more information.
2019 Digital woodworking workshop, April 27-28. Read More »
I’ve been writing, editing and YouTubing a new series on my CNC grid system. Always a very popular subject in my digital woodworking classes, these methods for setting up your CNC make setting up, aligning and positioning parts a piece of cake. Watch my blog at Popular Woodworking for more.
Add a Precision Grid system to your CNC Read More »
